LoadYourSats Stack Sats. Stay Private. Beginner's Guide · Australia

Buy your first Bitcoin.
Safely and securely.

This is a step-by-step guide for buying Bitcoin for the very first time in Australia. It assumes no prior knowledge.

You'll set up an account, buy a small amount of Bitcoin, and move it into a wallet that only you control. Each step explains why it matters, so you always understand what you're doing.

7 steps About 30–40 minutes No prior experience needed
1 Step 1 of 7 About 3 minutes

Create your CoinSpot account

Why this step matters

To turn Australian dollars into Bitcoin, you need an exchange — a service that swaps one for the other. This guide uses CoinSpot, an Australian exchange based in Melbourne and registered with AUSTRAC, the government agency that oversees financial services here.

Creating an account is free and only takes a few minutes. It's the foundation for everything that follows.

Step by step
  1. Open the CoinSpot website using the button below.
  2. Select Register and enter your email address.
  3. Create a long, unique password that you don't use on any other website.
  4. Confirm your email by clicking the link CoinSpot sends you.
  5. Once signed in, open Account → Two-Factor Authentication and turn it on.
Helpful tip

A password manager can create and remember a strong password for you, so you don't have to think one up or write it down.

Security tip

Two-factor authentication (2FA) asks for a second code when you sign in. It means that even if someone learns your password, they still can't reach your account. Turn it on before you add any money.

Common mistakes
  • Reusing a password from another website.
  • Skipping two-factor authentication to save time.
Before you continue
  • Your account is created and you're signed in.
  • Your email address is confirmed.
  • Two-factor authentication is turned on.
Continue to Step 2
2 Step 2 of 7 About 5 minutes

Verify your identity

Why this step matters

Australian law requires every registered exchange to confirm who its customers are. This is the same kind of identity check you'd complete when opening a bank account. It's normal, and it's a one-time step.

Once you're verified, you can deposit money and buy Bitcoin without further interruptions.

Step by step
  1. Go to Account → Verification.
  2. Have your driver's licence or passport ready.
  3. Follow the prompts to photograph your ID and, if asked, take a short selfie.
  4. Submit and wait. Verification is often automatic and usually completes within a few minutes.
Helpful tip

Good lighting and a plain, flat background help your documents get approved on the first try.

Security tip

Only ever enter these details on the official CoinSpot website or app. A genuine exchange will never ask for your ID by email or text message.

Common mistakes
  • Photos that are blurry, cropped, or have glare across the ID.
  • A name on your account that doesn't match the name on your ID.
Before you continue
  • Your ID has been submitted.
  • Your account shows as verified.
Continue to Step 3
3 Step 3 of 7 A few minutes

Add Australian dollars

Why this step matters

Before you can buy Bitcoin, you need Australian dollars sitting in your CoinSpot account. You move money across from your normal bank, much like paying a friend.

You stay in control of how much you add. There's no minimum, and it's completely fine to start small.

Step by step
  1. Open Deposit AUD.
  2. Choose PayID or bank transfer (Osko). PayID is usually the fastest.
  3. Copy the deposit details that CoinSpot shows you.
  4. Open your banking app and send the amount to those details.
  5. Wait for the funds to appear — PayID transfers often arrive within minutes.
Helpful tip

Decide your amount before you start — it makes the whole thing calmer. Many people begin with an amount they'd be comfortable setting aside and not touching.

Security tip

Copy the deposit details fresh from CoinSpot each time. Never rely on account details saved from a screenshot or an old message.

Common mistakes
  • Leaving out a reference code when your bank asks for one.
  • Sending from an account that isn't in your own name — some deposits need the names to match.
Before you continue
  • Your transfer has been sent from your bank.
  • Your AUD balance is visible in CoinSpot.
Continue to Step 4
4 Step 4 of 7 About 2 minutes

Buy your first Bitcoin

Why this step matters

With Australian dollars in your account, you can now buy Bitcoin. This is the moment you actually own some.

You don't need to buy a whole Bitcoin. It divides into very small units, so you can buy any dollar amount you like.

Step by step
  1. Search for Bitcoin (BTC).
  2. Select Buy.
  3. Enter the amount in Australian dollars, not in Bitcoin. The screen shows how much Bitcoin that buys.
  4. Review the amount and the fee shown.
  5. Confirm the purchase.
Helpful tip

The smallest unit of Bitcoin is called a sat (short for satoshi). One Bitcoin is 100 million sats, so even a small dollar amount buys thousands of them.

Common mistakes
  • Typing the amount into the Bitcoin field instead of the dollars field.
  • Rushing past the confirmation screen without checking the fee.
Before you continue
  • Your purchase is confirmed.
  • Your Bitcoin balance shows in your CoinSpot account.
Continue to Step 5
5 Step 5 of 7 About 5 minutes

Set up your Trust Wallet

Why this step matters

Right now your Bitcoin is held by CoinSpot on your behalf. A self-custody wallet is an app that lets you hold Bitcoin yourself, so you no longer depend on any company to access it.

This guide uses Trust Wallet, a free and widely used self-custody wallet that runs on your phone. Setting it up takes only a few minutes.

Step by step
  1. Install Trust Wallet from the Apple App Store or Google Play. Check the developer is listed as Trust Wallet before installing.
  2. Open the app and choose Create a new wallet.
  3. Set a passcode, and turn on Face ID or fingerprint unlock if offered. This locks the app on your device.
  4. The app will then prepare your Recovery Phrase. The next step covers this carefully — don't rush into it.
Helpful tip

Only install wallet apps from the official App Store or Google Play, and check the developer name and reviews first. Search ads sometimes lead to convincing fakes.

Security tip

The passcode protects the app on your phone. It is not the same as your Recovery Phrase, and it is not a backup. The real backup comes in the next step.

Common mistakes
  • Downloading a look-alike app with a similar name or icon.
  • Setting up the wallet somewhere public where the screen could be seen.
Before you continue
  • Trust Wallet is installed from the official app store.
  • A new wallet has been created.
  • An app passcode is set.
Continue to Step 6
6 Step 6 of 7 Take your time · About 10 minutes
The most important step in this guide

Back up your Recovery Phrase (Seed Phrase)

Why this step matters

This is genuinely the most important step, so it's worth slowing down for.

When you create a wallet, it generates a Recovery Phrase (Seed Phrase) — a list of 12 or 24 simple words. This phrase is the backup to your wallet. If your phone is ever lost, stolen, or broken, these words are what let you restore your Bitcoin on a new device.

Because the phrase can restore the wallet, anyone who has it can access your Bitcoin. And if the phrase is lost and you can no longer open the wallet, the Bitcoin may not be recoverable by anyone. That is why this step deserves your full attention.

How to record it
  1. When Trust Wallet shows your Recovery Phrase, write the words down by hand, in order, on paper. Number each one.
  2. Write clearly. A single misspelled or out-of-order word can make the whole backup fail.
  3. Read the words back against the screen and check every one.
  4. Trust Wallet will ask you to confirm a few of the words. This proves your written copy is correct.
  5. Consider writing the phrase out twice, on two separate sheets. A second copy means one damaged or misplaced sheet doesn't put your Bitcoin out of reach.
  6. Store each copy somewhere private and offline, away from fire and water — and keep the two copies in two separate locations, so a single fire, flood, or theft can't take both at once.
How to keep your Recovery Phrase safe
  • ✓
    Your phrase may be 12 or 24 words. Record every word, in the exact order shown.
  • ✓
    Keep it offline, on paper. Treat it like the only key to a safe.
  • ✓
    Consider writing it out twice and keeping the copies in two separate locations, so one lost or damaged copy isn't the end of your backup.
  • ✕
    Do not take a screenshot or photo of it.
  • ✕
    Do not save it in Notes, email, cloud storage such as iCloud or Google Drive, or any messaging app.
  • ✕
    Do not type it into any website. A real wallet never asks for your full phrase on a web page.
  • ✕
    Anyone who has the phrase can take your Bitcoin. Never share it. No genuine support team will ever ask for it.
  • ✕
    If you lose the phrase and can't open your wallet, your Bitcoin may be lost for good. There is no reset and no "forgot password".
Helpful tip

A printable template gives each word a numbered line, which makes it easier to record and check. Print one before you start.

Security tip

If any person, website, app, or "support" agent ever asks for your Recovery Phrase, it is a scam. Stop, and don't share it with anyone.

Common mistakes
  • Photographing the phrase "just for now".
  • Saving it in a notes app or in a cloud password manager.
  • Writing the words in the wrong order.
  • Keeping the only copy somewhere it could be damaged or lost.
Before you continue
  • The phrase is written on paper, by hand, in order.
  • You've noted whether it is 12 or 24 words.
  • You've read it back and confirmed it in the app.
  • No photo, screenshot, or digital copy exists anywhere.
  • You've considered a second written copy, kept in a separate location.
  • It's stored somewhere private, offline, and safe.
Continue to Step 7
7 Step 7 of 7 About 5 minutes

Move your Bitcoin to your wallet

Why this step matters

Your Bitcoin is still on CoinSpot. This final step sends it to the Trust Wallet you just backed up, so you're now holding it yourself.

To do this safely, you'll send a small test amount first, confirm it arrives, and then send the rest.

Step by step
  1. In Trust Wallet, select Bitcoin, then Receive. This shows your Bitcoin address (a long string of letters and numbers) and a QR code.
  2. Copy the address, or be ready to scan the QR code.
  3. In CoinSpot, go to Withdraw and select Bitcoin (BTC).
  4. Paste the address. Check that the first and last few characters match what Trust Wallet shows.
  5. Enter a small test amount first and confirm the withdrawal.
  6. CoinSpot emails you to confirm the withdrawal. Open that email and click the verification link — your Bitcoin isn't sent until you do.
  7. Once the test arrives in Trust Wallet, send the rest the same way, confirming that withdrawal by email too.
Check your email

After you confirm a withdrawal, CoinSpot sends a verification email before releasing the Bitcoin. This is a safety check that stops anyone moving your coins without access to your inbox. Open the email and click the link — if it doesn't arrive within a few minutes, check your spam folder. The transaction only goes through once you've clicked it.

Helpful tip

A Bitcoin transaction takes a little while to confirm — often minutes, sometimes longer when the network is busy. This is normal, and you don't need to do anything while you wait.

Security tip

Always send a small test amount first. Bitcoin transactions can't be reversed, so a test confirms the address is correct before you send the rest. Only ever paste an address you copied moments ago from your own wallet.

Common mistakes
  • Sending the whole amount before testing.
  • Forgetting to click the verification link in CoinSpot's email, then wondering why the Bitcoin hasn't moved.
  • Pasting an address copied from an old message or note.
  • Choosing the wrong coin on the withdraw screen — make sure it says Bitcoin (BTC).
Before you finish
  • You clicked the verification link in CoinSpot's confirmation email.
  • Your test amount was sent and arrived in Trust Wallet.
  • The remaining amount has been sent.
  • Your balance is visible in Trust Wallet.

You've bought your first Bitcoin

You set up an account, bought Bitcoin, and moved it into a wallet that only you control. Whenever you'd like to add more, you can repeat steps 3, 4, and 7.

Back to home